GABBRIELLI TECHNOLOGY

NAME: PFEFFERKORN PLASTICIMETER  COUNTRY: Italy MODEL No.: GT0675; DESCRIPTION: Instrument for the determination of the workability degree of ceramic material. The instrument is based on the Pfefferkorn experience to determine the plasticity clays submit to compression for the fall of a plate with calibrated weight on standard dimension specimen.    More
NAME: MERCURYMETER  COUNTRY: Italy MODEL No.: GT0690; DESCRIPTION: Laboratory instrument to determine the apparent density (porosity) of raw ceramic tiles by means of mercury. For the use it’s necessary an electronic balance by 4500 gr approximately and minimum readability of 0,1 gr and 3 kg of bi-distilled mercury, to be ordered separately.    More
NAME: PENETROMETER FOR CLAYS CP  COUNTRY: Italy MODEL No.: GT0677; DESCRIPTION: Portable, economy and fast instruments for the determination of the hardness of clays: • Extruded (for bricks, roof tiles, “cotto” tiles, etc) • Pats of clay (for hobby, artistic, table dinnerware, sanitary ware, etc). The operation principle is based on the contrast force to penetration made by the sample mater...    More
NAME: LABORATORY PRESS 30 T  COUNTRY: Italy MODEL No.: GT0780; DESCRIPTION: Pneumo-hydraulic manual press for testing on ceramics samples. Essentially consisting of one pneumo-hydraulic cylinder with pressing force applied by means of hand. The maximum force from the cylinder can be adjusted by the operator up to 30 T .Once manually charged in the mould the powder is being pressed by the cy...    More
NAME: LABORATORY PRESS 40 T  COUNTRY: Italy MODEL No.: GT0768,GT0769; DESCRIPTION: Hydraulic press for testing on ceramics. Essentially consisting by a support base steel epoxy painted, two column steel zinc, two cylinders and an hydraulic power-pack with oil tank. The maximum pressure from the top cylinder can be adjusted by the operative up to 40 Ton (see models below). Once manually charged in ...    More
NAME: PRESSES FROM 70 UP TO 225 T  COUNTRY: Italy MODEL No.: GT0782,GT0783,GT0784,GT0785,GT0786,GT0787; DESCRIPTION: Hydraulic press for laboratory tests or small special production quantity. Manufactured in three different version 70, 110, 225 t maximum load designed to pressure mould ceramic object, tiles, test specimens, refractories, bricks etc. The mould is interchangeable and can be our standard or on customer’s request acco...    More
[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25]